We have two workshop buildings, each 3157m² (33 976 ft²), available for set construction, art department, wardrobe and storage space.



Each workshop building comprises the following:

 

Workshops

Two workshops each 1129 m² and 1219 m² respectively with clear floor to underside of truss height of 5900mm. Roller shutter doors provide inter-leading access. The workshops are linked to all offices and mini-workshops and each has two fire escape doors. Each workshop is flanked by art department facilities and mini workshops.

Air Conditioning

All mini-workshops and offices are air-conditioned by means of a VRV system. The condensers are situated on a concrete roof which is over the emergency exits of the building. Each office or workshop has individual control. The VRV units and condensers are all Daikin Brand.

Each workshop is fitted with a fresh air system on either side of the workshop and a smoke extraction system at the higher end of the Gables.

Air Compressor

Each workshop is fitted with an air compressor which serves 12 workstations per workshop. Each workstation has a constant pressure of 6 bar.

Floor

Allowable variable or fixed distributed load on the workshop floor is 50kPa or 5000kg/m2.
The reinforced concrete floor to facilitate: 4.5t capacity fork-lift trucks with single pneumatic-tyre wheels with spacing 900mm; Free movement of 4t truck.

Structure

Top boom of the trusses are curved at a 40 m radius.
Trusses are at 6m centres and span 30.6m.

Workshop Power and Lighting

  • Each workshop has a total capacity 630 A.
  • Each workshop is divided into two separate metered zones of 320 A each.
  • Workshop working areas are equipped with a busbar reticulation along perimeter walls facilitating tap-off points wherever equipment will be positioned. 
  • Tap-offs consists of a tap-off unit connected to a ready board, equipped with its own earth leakage and 16A socket outlets preventing disruption to the complete workshop in the event of a fault.
  • Three-phase outlets can be added as required, supplied from the busbar system.

Mini-Workshops

  • Six mini-workshops, three of them 53 m² each and the other three 49 m² each.
  • All workshops equipped with industrial sinks.
  • Exposed cast in-situ concrete floor. 
  • Manually operated galvanised mild steel roller shutters.
  • Security systems

Art Department Offices

  • Six offices, three being 59 m² each, linked by inter leading doors, and the other three 47 m² each, also linked by inter leading doors.
  • Painted power floated cast in-situ concrete. (Carpets optional)
  • Offices designed for multi-purpose usage i.e. art department, design, wardrobe, SFX, VFX, Set Dressing, Props, etc.
  • Kitchenette
  • Security systems

Paint Storage Facilities

  • Cast in-situ concrete floor.
  • The floor is 125mm thick and is designed for light industrial purposes only.
  • Internal Walls: 230mm brick wall with rough plaster and painted.
  • External Walls: 280mm brick cavity wall with rough plaster and painted.
  • Painted solid timber doors.
  • Exposed cast in-situ concrete slab soffit ceiling.
  • Galvanised steel Klip-lock roof profile with factory finish.

WC’s - Workshop Complex

  • 4 WC sets per building
  • 4 disabled units per building
  • Two male and two female sets
  • Each WC with shower facility

Gas Storage Facility

  • Three gas stores designed to individually store: Argon cylinders ,Oxygen cylinders and Acetylene cylinders, LPG Gas cylinders
  • Powerfloat concrete floors.
  • Internal Walls: Two hour rated 230mm brick wall with rough plaster and painted.
  • External Walls: 280mm brick cavity wall with rough plaster and painted.
  • Hot dipped galvanised Bekaert steel mesh doors.
  • Exposed cast in-situ concrete slab soffit ceiling.
  • Galvanised steel Klip-lock roof profile with factory finish.

Newsletter

Subscribe to our newsletter
Name:
Email: